Thursday, July 11, 2013

BMW 1966-73 Models Wheel Alignment Guide

1966 TO 1973 BMW SPECIFICATIONS AND ADJUSTMENTS
TIRE INFLATION (COLD)
Before attempting to check or adjust wheel alignment, ensure that tires are properly inflated.

CASTER AND CAMBER
All Models - Before checking caster and camber, vehicle must be in loaded condition consists of two 143 lbs. weights on front seat, one 143 lbs. weight on rear seat, gas tank full and 66 lbs. on left side of luggage compartment. If caster and camber are not within specifications check suspension for damage. Repair or replace parts as necessary.

TOE-IN
All Models - Before checking toe-in, vehicle must be in loaded condition (see Caster and Camber). Check toe-in with front wheels in straight ahead position. If not within specifications, loosen tie rod clamping bolts. Rotate both tie rod tubes until loosen tie rod clamping bolts. Rotate both tie rod tubes until toe-in is within specifications. Tighten clamping bolts.

0 comments:

Post a Comment